Firecel SR114E White - Enhanced Fire Alarm Cable - LPCB and BASEC Approved

 CABLE CONSTRUCTION 

 Conductors 

 Plain annealed copper wire, solid class 1 or stranded class 2 according to EN 60228. 

 Insulation 

 Mica/Glass fire resistant tape covered by high performance fire resistant silicone rubber type El2 to BS EN 50363-1. 

 Cabling 

 Insulated cores are cabled together. 

 Overall screen 

 Aluminium/polyester tape. 

 Drain wire 

 Uninsulated tinned copper conductors of the same section and class as the insulated conductors in the 2, 3 and 4 core cables.

 Drain wire of 0.5 mm2 tinned copper conductor is   provided in cables with more than 4 conductors

 Outer sheath 

 LSZH thermoplastic material type LTS3  according to BS 7655.

 Colour red or white (other colours on request)

 Colour code up to 4 Cores to HD

 2 cores: 

 3 cores: 

 4 cores: 

 OPERATING TEMPERATURE 
 -40DegC to +90DegC

 FIRECEL SR 114E are primarily intended for use in fire detection and fire alarm systems, emergency lighting circuits or if cables need to property operate when fire resistance   improve­ment is required.

 Typical applications are: 

 . BS 5839-1 for enhanced fire resistant cables in fire detection and fire alarm systems for building

 . BS 5839-8 for voice alarm systems

 . BS 5839-9 for emergency voice communication systems

 . BS 5266-1 for emergency lighting of premises

 . BS 8519 for fire-resistant control cable systems for life safety and fire-fighting application - Cat­egory 2

 Weight : 

 Dimension : 

 Cable in one drum: 

 Pallet weight : 

 Total net weight including both :